Free Next Working Day Delivery
Use our car reg compatibility checker to make sure your getting the right charger for you vehicle.
Before you buy anything, check the boot. The Leapmotor B10 is listed as arriving with a Type 2 AC cable and a domestic 3-pin cable as standard, which is more generous than most manufacturers manage in 2026. So the first honest question is not which cable to buy, it is whether you need one at all.
Two things usually decide it. The first is length. Supplied cables are short, typically 5m, which is fine if your wallbox is beside the driver's door and awkward if it is not. The B10's charge flap is on the rear right, so if you reverse onto a driveway with the box on the far wall, or you share a bay, a 5m cable can end up two metres short of useful.
The second is the current rating, and Leapmotor does not publish it. A 16A cable holds the car to 3.7 kW, a 32A cable lets it take 7.4 kW at home. That is the difference between ten and a quarter hours and twenty and a half hours from empty. If your supplied cable is a 16A one, replacing it is the single biggest improvement you can make to how this car lives with you.
Look at the moulding on the plug or the label on the bag. It will say 16A or 32A, and often 3.7 kW or 7.4 kW. If it only gives a kW figure, 3.7 kW means 16A and 7.4 kW means 32A. Cable thickness is a rough guide too, a 32A cable is noticeably chunkier.
The B10 has an 11 kW onboard charger, which is a genuine three-phase figure and better than the 6.6 kW fitted to the T03 and C10. British houses are supplied with a single phase, so at home the B10 draws 7.4 kW, and our 32A single-phase Type 2 to Type 2 cable delivers exactly that. Empty to full in about ten and a quarter hours, roughly 30 miles of range added an hour.
Where the 11 kW does count is three-phase supplies, which are common at workplaces, farms and industrial units. Plug a 3-Phase 32A cable into one of those and the B10 takes the full 11 kW, dropping a complete charge to seven hours and lifting you to 44 miles an hour. Buy that cable only if you know you have three phases, because on a normal house it behaves exactly like the cheaper 32A cable.
Maximum onboard AC charging speed: 11 kW, three phase
| Cable Type | Max Charge Rate | Empty to Full | Range Added Per Hour | Verdict |
|---|---|---|---|---|
| Type 2 - 1-Phase, 16A (5m / 10m) | 3.7 kW | 20 hours 30 mins | approx. 15 miles | Replace this one |
| Type 2 - 1-Phase, 32A (5m / 10m) | 7.4 kW | 10 hours 15 mins | approx. 30 miles | Best Fit at home |
| Type 2 - 3-Phase, 32A (5m / 10m) | 11 kW | 7 hours | approx. 44 miles | For 22kW posts and workplaces |
| Type 2 to 3-Pin (5m / 10m) | 2.3 kW | 33 hours | approx. 9 miles | Emergency top-ups |
Times use the 67.1 kWh capacity. Range added per hour is derived from the car's WLTP efficiency and will fall in cold weather and at motorway speeds.
The supplied 3-pin cable is genuinely useful to keep, and if you would rather have a sealed one that can live outdoors, our Type 2 to 3-Pin cable is IP67 rated and adds about nine miles an hour, so an overnight stay at a relative's house is worth around 115 miles.
Lengths run 5m to 20m. Given the rear right charge flap, 10m is the length most B10 owners end up wanting, and 15m or 20m suits detached garages and long driveways. Cables ship CE and TUV certified, IP55 sealed on the Type 2 to Type 2 and IP67 on the Type 2 to 3-Pin, rated -30C to 55C, with a 2 year manufacturer's warranty and free next working day UK delivery.
The B10 Hybrid EV and B05 also come with cables as standard, and the same length and rating questions apply. Full range on the Leapmotor charging cable page.
Two reasons. Length, because a supplied cable is usually 5m and the socket is on the rear right, and rating, because if it is a 16A cable the car charges at half speed. If yours is a 32A cable long enough to reach comfortably, you do not need us, and we would rather tell you that than sell you a spare.
The rating is moulded into the plug body or printed on the label. 16A and 3.7 kW mean the same thing, as do 32A and 7.4 kW. If the cable is unlabelled, its thickness is a clue, but the safer move is to watch the charge rate on your wallbox app: around 3.7 kW means 16A.
Not on a normal domestic supply, no. Homes in Britain get a single phase, so the ceiling is 7.4 kW regardless of cable or wallbox. Getting 11 kW needs a three-phase connection, which is a job for your distribution network operator and rarely worth it for one car.
It is if you charge somewhere with three phases, and a workplace car park is the usual case. It takes a full charge from ten and a quarter hours down to seven. On a single-phase house it does nothing extra, so do not buy it hoping to future-proof.
Rear right, so on the offside as you look at the car from behind in the UK. Worth knowing before you order a length, because it puts the socket on the road side if you park kerbside on the left.
Yes. Once charging starts the B10 latches the connector into the socket and it cannot be pulled out until you unlock the car. That is what makes leaving your own cable at an untethered public post reasonable rather than reckless.
We pride ourselves on the quality of our cables. Every cable comes with a 2 year manufacturer's warranty, and the jacket will survive being driven over, though we would rather you did not make a habit of it.
Protection against pressure
Our cables are safe to use whatever the weather. Type 2 to Type 2 cables are IP55 rated and Type 2 to 3 pin cables are IP67 rated. All are IEC, TUV and CE compliant and operate from -30C to +60C.
Protection against temperature
Our cables fit any electric car or plug-in hybrid with a Type 2 inlet, including Audi, BMW, Volvo, Mini, Mercedes, Kia, Hyundai, Volkswagen, Smart and Toyota. Use our car reg checker to confirm your car.
Compatible with all Type 2 cars
| Model and years | Battery | Connector | Max AC charge speed | Cable we recommend |
|---|---|---|---|---|
| Leapmotor B10, 2025 on | 67.1 kWh | Type 2 | 11 kW, three phase | Type 2 to Type 2, 32A single phase |
On a UK single-phase home supply the B10 draws 7.4 kW, which the 32A single-phase cable delivers in full. The 11 kW rating only comes into play on a three-phase supply, where the 3-Phase 32A cable is worth having. If your car is a smaller-battery version, the cable choice is identical, only the charging time changes.
Free Next Working Day Delivery
Use our car reg compatibility checker to make sure your getting the right charger for you vehicle.
Cable Type:
How do I Choose?The cable connection depends on what connection type your car accepts. If you don’t know, use our handy car reg checker.
Cable Length:
Sizing guideWe offer different length cables to suit your needs, whether you park next to your charger at home or at the office.
Rated Power (Charge Speed):
How do I Choose?We offer different length cables to suit your needs, whether you park next to your charger at home or at the office.
Accessory Add-Ons
We offer a range of products to help store and transport your charging cable. Choose from the accessories below:
A charging cable that connects electric vehicles (EVs) with a Type 2 connector to charging points is also equipped with a Type 2 socket. It supports faster charging speeds and is commonly used across Europe for EVs with this standard connection.
This cable allows electric vehicles with a Type 2 socket to charge from a standard UK 3-pin domestic outlet. It provides a slower charge but is useful for home or emergency charging when dedicated charging stations aren't available.
A cable is used to extend the reach of a Type 2 charging cable. It’s helpful when the existing cable is too short to connect an electric vehicle to the charging point, providing more flexibility in parking.
A fixed charging cable attached to a charging point, designed for electric vehicles with a Type 2 socket. The tethered design eliminates the need to carry a separate cable, offering convenience for regular charging at home or work.
A charging cable that connects electric vehicles with a Type 1 socket to charging points equipped with a Type 2 outlet. This allows EVs with the older Type 1 standard to use more modern charging infrastructure.
This cable enables electric vehicles with a Type 1 connector to charge from a standard UK 3-pin household outlet. It’s suitable for slower charging at home when dedicated EV charging points aren’t accessible.
A 5M charging cable is the shortest length that we offer. This is great if you can park close to the electricity supply and you don't need much length to reach your car this is a great option for you.
A 10M charging cable is the most popular length. It allows you to have enough flexibility whilst still being easy enough to move. This is a great option if you cannot park close to the electricity supply.
A 15M charging cable is a great choice if you need some extra flexibility, i.e. get past another car or reach the other end of a driveway. The length of the cable does not affect the charging speed.
A 20M charging cable is the longest cable that we currently offer. 20M should be sufficient to reach the vast majority of locations where you would like to charge your car. If this isn't enough you can always add an extension cable.
If you are looking to charge your car using a 3-pin socket this is a great choice for you. The maximum charge speed for a 3 pin socket is 12 amps, so this cable will be capable of charging at the maximum charge speed but it also gives you the option if you want to charge at a slower speed (Reducing risk and costs).
A 16amp cable will be able to charge at 3.6kW. This is the cheapest product if your car's max charge speed is 3.6kW. If you have two electric cars or are looking to purchase another it might be worth considering a faster charging cable as this could limit charge speeds moving forward.
A 32amp charging cable will be able to charge at 7.2kW. This is the maximum output from a domestic house. A 32amp charge speed will also be able to charge at all lower charge speeds (i.e 16amp - 3.6kW). This is a great choice if you are limited to 7.2kW or you only charge your car at home.
A 32amp 3-phase charging cable will be able to charge at all speeds up to 22kW. This cable will ensure that your ev charging cable never limits your charge speed at home or in public. This cable is also capable of charging at all lower charge speeds.
Your cart is empty.
Continue shopping
