Free Next Working Day Delivery
Use our car reg compatibility checker to make sure your getting the right charger for you vehicle.
The Mazda MX-30 takes 6.6 kW AC, the lowest onboard charging rate of any electric car we write about. Mazda withdrew the MX-30 from the UK range during 2025, so almost everyone buying a cable for one now is a second or third owner, often working out what the original supplying dealer did or did not hand over with the car.
The MX-30 uses a Type 2 to Type 2 Charging Cable. The inlet is a CCS Combo 2 on the rear right wing, and the round Type 2 portion at the top is where an AC cable connects. There is no Type 1 version of this car, so if a private seller hands you a Type 1 lead it did not come with the MX-30.
Because the car's own charger caps at 6.6 kW, the MX-30 is the rare case where the limit sits in the vehicle rather than in your house. Most electric cars accept 11 kW and are held to 7.4 kW by a single phase domestic supply. The MX-30 cannot reach even 7.4. A 32A single phase cable will feed it 6.6 kW, which is everything it can take, and a 22 kW three phase cable would deliver exactly the same 6.6 kW for more money. Three phase is genuinely pointless on this model.
The 32A single phase lead is still the one to buy. It fills the 35.5 kWh battery in about 6 hours and returns roughly 23 miles of range an hour. Step down to a 16A cable and the rate falls to 3.7 kW, stretching a full charge to 10 hours 45 minutes and halving the miles per hour to about 13. Given the MX-30's modest 124 mile range, losing half your charging speed hurts more here than it would on a long range car, because there is less buffer to absorb a night when charging did not finish.
A Type 2 to 3-Pin Charging Cable works genuinely well on this car. At 2.3 kW it fills the MX-30 in about 17 hours 30 minutes, and because the battery is small, an ordinary overnight stint on a household socket returns a useful 60 to 70 miles. For a used MX-30 owner without a wallbox yet, a three pin lead is a real interim charging solution rather than a token gesture.
Mazda also sold the MX-30 R-EV, which pairs a much smaller 17.8 kWh battery with a rotary petrol generator and gives around 53 electric miles. If your car has a fuel filler as well as a charging flap, it is the R-EV and its charging times are far shorter than the ones below.
The Mazda CX-60 charging cable page covers Mazda's plug-in hybrid SUV, and the Mazda EV charging cables collection lists everything we stock for the marque.
A 2 year manufacturer's warranty comes with every cable here, alongside free next working day UK delivery. Construction is IEC 62196 Type 2 with CE certification, IP55 on Type 2 to Type 2 leads and IP67 on Type 2 to 3-Pin leads, rated from -30C to +50C, or +60C for the 3-pin.
Maximum onboard AC charging speed: 6.6 kW, which no cable can exceed.
| Cable Type | Max Charge Rate | Empty to Full | Range Added Per Hour | Verdict |
|---|---|---|---|---|
| 16A Type 2 to Type 2 | 3.7 kW | 10 hours 45 mins | approx. 13 miles | Slower than the car allows |
| 32A Single Phase Type 2 to Type 2 | 6.6 kW (car limited) | 6 hours | approx. 23 miles | Best Fit at home |
| 32A Three Phase Type 2 to Type 2 | 6.6 kW (car limited) | 6 hours | approx. 23 miles | No benefit on this car |
| Type 2 to 3-Pin | 2.3 kW | 17 hours 30 mins | approx. 8 miles | Workable without a wallbox |
Mazda gives 35.5 kWh for the pack and never separates out the usable portion, so the times here rest on the full number and a real charge will end a little earlier. Note also that Mazda's own UK charging table implies a slightly higher rate than the 6.6 kW quoted at launch, so treat 6.6 kW as the conservative figure. Expect lower figures in winter and on long fast runs.
We pride ourselves on the quality of our cables. Every cable comes with a 2 year manufacturer's warranty, and the jacket will survive being driven over, though we would rather you did not make a habit of it.
Protection against pressure
Our cables are safe to use whatever the weather. Type 2 to Type 2 cables are IP55 rated, CE marked, and work from -30°C to +50°C. Type 2 to 3 pin cables are IP67 rated, CE marked and work from -30°C to +60°C.
Protection against temperature
Our cables fit any electric car or plug-in hybrid with a Type 2 inlet, including Audi, BMW, Volvo, Mini, Mercedes, Kia, Hyundai, Volkswagen, Smart and Toyota. Use our car reg checker to confirm your car.
Compatible with all Type 2 cars
A Type 2 to Type 2 charging cable, and the 32A single phase version is the right pick. The Mazda MX-30 accepts 6.6 kW, the 32A cable carries that comfortably, and a full charge takes about 6 hours.
Most Mazda MX-30s were supplied with a Type 2 to Type 2 Mode 3 cable for wallbox and public post charging. A three pin Mode 2 cable was not always included. Since the MX-30 left the UK price list in 2025, replacements are no longer a dealer item for many owners, and buying a 32A Type 2 to Type 2 lead restores the car to how it was sold.
Yes. The Mazda MX-30 is limited to 6.6 kW by its own onboard charger, which is below what a single phase supply already provides. A 22 kW three phase cable therefore charges an MX-30 at precisely the same speed as a 32A single phase one. There is no scenario, at home or at a public post, where the extra phases help this car.
The Mazda MX-30 R-EV carries a 17.8 kWh battery instead of 35.5 kWh, roughly half the size, plus a rotary petrol generator to extend its range. It gives about 53 miles on electricity and refills far more quickly than the battery electric MX-30. Both cars use the same Type 2 to Type 2 cable.
The Mazda MX-30 is a compact crossover at just over 4.4 metres, and its charging flap is on the rear right wing. Owners who reverse onto a driveway with the wallbox on the right will manage on 5m. Drive in forwards and that flap sits at the far end of the car from the wall, where 10m removes the problem. The rear hinged back doors do not affect cable routing, but leave room to open them.
A seven hour off peak period on a 32A single phase cable puts about 160 miles into a Mazda MX-30, which is more than the car can hold, so the battery fills and stops. That is the useful thing about a small battery: one cheap rate window always covers a full charge, provided the cable is not holding the car back.
Showing both cable types. Choose a cable type above and this section will show just that specification.
Showing the specification for the cable type you have selected. Compare both cable types.
| Type 2 to Type 2 | Type 2 to 3 pin | |
|---|---|---|
| Charges from | A home wallbox or a public charge point | Any standard UK 3 pin socket, no wallbox needed |
| Max power | 3.7 kW at 16A, 7.4 kW at 32A, 22 kW on three phase | 2.4 kW |
| Speed at home | 7.4 kW on a 32A cable. UK homes are single phase, so an 11 kW or 22 kW car still draws 7.4 kW | 2.4 kW |
| Range per hour | About 12 miles at 3.7 kW, 25 miles at 7.4 kW | About 8 miles |
| Weatherproof rating | IP55 | IP67 |
| Temperature | -30°C to +50°C | -30°C to +60°C |
| Built to | IEC 62196-2:2016 2-IIb | IEC 62752:2016 / COR1:2019 |
| Certified | CE | CE |
| Best for | Your everyday charging cable | Backup, and away from home where there is no wallbox |
| Choose this | Select Type 2 to Type 2 for the Mazda MX-30 | Select Type 2 to 3 pin for the Mazda MX-30 |
| Full range | All Type 2 to Type 2 cables | All Type 2 to 3 pin cables |
| Connector type | Type 2 to Type 2 (IEC 62196-2:2016 2-IIb, Mennekes) |
| Rated current | 16A or 32A single phase, or 32A three phase |
| Max power | 3.7 kW at 16A, 7.4 kW at 32A, 22 kW on three phase |
| Speed at home | 7.4 kW. UK homes are single phase, so an 11 kW or 22 kW car still draws 7.4 kW |
| Range per hour | About 12 miles at 3.7 kW, 25 miles at 7.4 kW |
| Slower supplies | Fine. Charging runs at the lowest limit of the car, the charge point and the cable, so a 32A cable works normally on a 16A supply |
| Voltage | AC 250V single phase, AC 400V three phase, 50Hz |
| Signal current | 2A at 30V |
| Full range | All Type 2 to Type 2 cables |
| Lengths | 5m, 10m, 15m, 20m |
| Conductors | 16A: 3 x 2.5mm² plus 2 x 0.5mm² 32A single phase: 3 x 6mm² plus 2 x 0.5mm² 32A three phase: 5 x 6mm² plus 1 x 0.5mm² |
| Insulation | XLPO |
| Sheath | TPU |
| Shell | Flame retardant thermoplastic, UL94-V0 |
| Pins | Copper alloy, silver plated |
| Colour | Black cable, green and black connectors |
| Weatherproof rating | IP55 in use |
| Temperature | -30°C to +50°C |
| Mechanical life | Over 1,000 connections |
| Impact | Survives a 1m drop and a 2 tonne vehicle driving over it |
| Plug force | Under 100N |
| Insulation resistance | Over 1,000 MΩ at DC 500V |
| Withstand voltage | 2,500V |
| Contact impedance | 0.5 mΩ maximum |
| Pin temp rise | Under 50K |
| Built to | IEC 62196-2:2016 2-IIb |
| Certified | CE |
| Connector type | Type 2 to 3 pin, BS1363 13A plug |
| Socket needed | Any standard UK 3 pin socket. No wallbox needed |
| Max power | 2.4 kW |
| Current | 6A to 13A, set on the control box |
| Voltage | 230V AC, 50Hz |
| Range per hour | About 8 miles |
| Overnight | About 100 miles in 12 hours |
| Full range | All Type 2 to 3 pin cables |
| Weatherproof rating | IP67 |
| RCD | Built in, Type B |
| Protection | Over and under voltage, overload, short circuit, earth leakage, over temperature and lightning surge |
| Built to | IEC 62752:2016 / COR1:2019 |
| Certified | CE |
| Display | OLED screen: charging time, energy used, live voltage, current and power, and lifetime total |
| Controls | Touch key, LED status light, adjustable current, delay timer |
| Box size | 200 x 90 x 52 mm |
| Weight | Up to 2.1 kg |
| Cooling | Natural air |
| Standby power | Under 0.5 W |
| Connectivity | None. No WiFi, Bluetooth, 4G or Ethernet |
| Lengths | 5m, 10m, 15m |
| Temperature | -30°C to +60°C |
| Humidity | Up to 95% |
| Max altitude | 2,000m |
| Materials | Tempered glass and PC control box |
| Colour | Black |
| In the box | Charging cable only. The premium storage carry bag is sold separately |
| Warranty | 2 year warranty |
| Delivery | Free next working day UK delivery |
Two MX-30s exist and, counter-intuitively, the plug-in hybrid charges faster on AC than the full electric car. The MX-30 electric has a 6.6 kW onboard charger. The MX-30 R-EV, which uses a small rotary engine as a generator, has a 7.2 kW charger and, unusually for a plug-in hybrid, DC rapid charging at 36 kW. Both are Type 2, so a 32A cable is right for either. One number worth correcting: the electric MX-30 is sold as a 35.5 kWh car, but that is the gross figure and you actually use about 30 kWh, which is why its range is modest. Note also that UK cars were built with the 6.6 kW single-phase charger; an 11 kW three-phase version exists in other markets.
| Badge | Years | Battery | Connector | Max AC charge speed | Cable we recommend |
|---|---|---|---|---|---|
| MX-30 electric, all UK trims | 2021 to 2024 | About 30 kWh usable, 35.5 gross | Type 2, plus CCS rapid at up to 50 kW | 6.6 kW on UK cars | Type 2 to Type 2, 32A |
| MX-30 R-EV, rotary range extender | 2023 onwards | 17.8 kWh | Type 2, plus CCS rapid at 36 kW, rare on a plug-in hybrid | 7.2 kW, 20 to 80 per cent in about 1 hour 30 minutes | Type 2 to Type 2, 32A |
| Mazda CX-60 e-Skyactiv PHEV | 2022 onwards | 17.8 kWh | Type 2. No rapid charging | 7.2 kW, about 2 hours 30 minutes for a full charge | Type 2 to Type 2, 32A |
Free Next Working Day Delivery
Use our car reg compatibility checker to make sure your getting the right charger for you vehicle.
Cable Type:
How do I Choose?The cable connection depends on what connection type your car accepts. If you don't know, use our handy car reg checker.
Cable Length:
Sizing guideWe offer different length cables to suit your needs, whether you park next to your charger at home or at the office.
Rated Power (Charge Speed):
How do I Choose?Rated power is the fastest the cable can charge. Match it to your car and your charge point. A higher rated cable still works at every lower speed.
Accessory Add-Ons
We offer a range of products to help store and transport your charging cable. Choose from the accessories below:
A charging cable that connects electric vehicles (EVs) with a Type 2 connector to charging points is also equipped with a Type 2 socket. It supports faster charging speeds and is commonly used across Europe for EVs with this standard connection.
This cable allows electric vehicles with a Type 2 socket to charge from a standard UK 3-pin domestic outlet. It provides a slower charge but is useful for home or emergency charging when dedicated charging stations aren't available.
A cable used to extend the reach of a Type 2 charging cable. It's helpful when the existing cable is too short to connect an electric vehicle to the charging point, providing more flexibility in parking.
A fixed charging cable attached to a charging point, designed for electric vehicles with a Type 2 socket. The tethered design eliminates the need to carry a separate cable, offering convenience for regular charging at home or work.
A charging cable that connects electric vehicles with a Type 1 socket to charging points equipped with a Type 2 outlet. This allows EVs with the older Type 1 standard to use more modern charging infrastructure.
This cable enables electric vehicles with a Type 1 connector to charge from a standard UK 3-pin household outlet. It's suitable for slower charging at home when dedicated EV charging points aren't accessible.
A 5M charging cable is the shortest length that we offer. It is a great option if you can park close to the charge point and do not need much length to reach your car.
A 10M charging cable is the most popular length. It allows you to have enough flexibility whilst still being easy enough to move. This is a great option if you cannot park close to the electricity supply.
A 15M charging cable is a great choice if you need some extra flexibility, i.e. get past another car or reach the other end of a driveway. The length of the cable does not affect the charging speed.
A 20M charging cable is the longest cable that we currently offer. 20M reaches the vast majority of locations where you would want to charge your car. Always use one continuous cable. Never join two charging cables together and never charge through an extension lead, because the join is where heat builds up.
The choice if you will charge from a standard UK 3 pin socket. It runs at the most the socket can safely supply, and the control box lets you turn the current down for a slower, gentler charge overnight or on an older circuit.
A 16amp cable will be able to charge at 3.7kW. This is the cheapest product if your car's max charge speed is 3.7kW. If you have two electric cars or are looking to purchase another it might be worth considering a faster charging cable as this could limit charge speeds moving forward.
A 32amp charging cable will be able to charge at 7.4kW, which is the most a single phase UK home supply can deliver. A 32amp cable also charges at every lower speed (for example 16amp, 3.7kW), so it is the right choice if your home charge point is 7.4kW or you mostly charge at home.
A 32amp 3-phase charging cable will be able to charge at all speeds up to 22kW, so the cable never limits your charge speed at home or in public. It is also capable of charging at all lower charge speeds.
Your cart is empty.
Continue shopping
