It is important to match up the charger and cable types to ensure that the EV charger can recharge at the advertised capacity so that your car can recharge at the optimum speed.
The lower the wattage, denoted by the kW, the slower the recharge rate.
If you buy a higher-rated EV Charging Cable (Type 2) – for example, a 32amp fast or rapid/ ultrafast charger – this cable will be compatible with any lower power-rated charger, up to 32amp.
As such, at EV Cable Shop, we advise buying the higher-rated power Type 2 cable if possible, as this will always charge your electric car at the optimum speed and allow you to use your charger type long into the future.
Single or 3-phase cables
In order to charge a vehicle using fast or rapid/ ultrafast chargers, such as 11kW or 22kW, the charging unit will need a three-phase electricity supply.
Domestic homes in the UK, unless altered, run on a single-phase electricity supply, as they do not need to power high-consumption devices, like those seen in data centres.
However, our EV Charging Cables are compatible with both single and 3-phase power, allowing you to access commercial charging via rapid and ultrafast chargers (e.g., at public charging stations) and charge your electric cars three times faster than when using a Type 2 EV charger.
Tethered and untethered cables
Home chargers are often fitted with Type 2 tethered cables that remain in situ, allowing the driver to quickly plug into their main charging unit, without looking for or getting out separate cables.
Untethered cables are often purchased as a supplementary to the tethered cable, allowing drivers to connect to any type of public Type 2 sockets while out and about.
These are available in a variety of lengths and amperages to match your vehicle’s charging capacity, which can be found in your vehicle’s handbook if you are unsure.
These can be stored safely and securely inside EV charging cable bags, which are waterproof, dust and corrosion-resistant, ensuring that your cable is safe during transport and lasts as long as possible. The cable pages are available at a cost effective fair price.
They are a whole host of cars that require a type 2 connector. In fact, most cars manufactured in the UK, EU, or the US require a type 2 charger including the popular Jaguar I Pace, Range Rover Sport, BMW i3, and the popular Audi E-Tron. The type 2 to type 2 charging cable is often referred to as the IEC 62196 standard. The type 2 cable will also work with other electric car.
They are a whole host of cars that require a type 2 connector. In fact, most cars manufactured in the UK, EU, or the US require a type 2 charger including the popular Jaguar I Pace, Range Rover Sport, BMW i3, and the popular Audi E-Tron. The type 2 to type 2 charging cable is often referred to as the IEC 62196 standard.
Yes, in the UK and Europe, the majority of public charging stations have a type 2 connector. This means that if you have a type 2 car, you will need an electric vehicle charging cable to connect the car to the charging station. Often, charging station stations might offer a Type 2 tethered cable (This means a Type 2 cable will already be attached to the charging station and ready to be plugged into your car). Here at EV Cable Shop, we recommend if you have a type 2 car, always carry a spare charging cable with the correct cable length. This means that no matter what the situation is at the charging station, you will always be able to charge your electric vehicle.
The charge speed and amperage of a Type 2 charging cable can vary depending on the specific charging system and electric vehicle (EV) being used. In general, however, Type 2 cables are capable of delivering a range of charging speeds and amperages.
Charging speed is typically measured in kilowatts (kW) and determines how quickly an EV can charge. A Type 2 charging cable can support charging speeds of up to 43 kW, which is sufficient to charge most electric cars in a few hours. Some high-power charging systems and EVs are capable of faster charging speeds, but these typically require a higher rated cable.
Amperage, on the other hand, is a measure of the flow of electrical current and is typically measured in amperes (A). The amperage of a Type 2 ev cables can range from 16 A to 63 A, depending on the specific charging system and EV being used. Higher amperages can allow for faster electric vehicle charging, but may also require the use of thicker, more heavy-duty cables.
It is important to note that the actual charging speed and amperage of a Type 2 charging cable will depend on the specific charging system and EV being used, as well as other factors such as the available power supply and the condition of the charging cable. If you choose the correct electric vehicle charging cable, it will charge your car at the same speed as the manufacturer’s cable.
